Back To Application Page
1. AR TALC

AR TALC is High Aspect Ratio Talc, Having Aspect ratio of 8. Produced by Wet Milling Process. Used in Automotive, Coil, Marine coatings and many more protective coatings as well as exterior emulsion paints. Due to platy structure AR TALC T shows good barrier properties, reinforcement property, scrub property, gloss, non yellowing property, corrosion and coverage.

2. Lithomer R

Lithomer R is white pigment opacifier. This product can be used in solvent based, powder coatings, printing inks, Etc. It has good non yellowing property as well gloss enhancing property specially in top coats. It can replace Titanium Dioxide upto 20-25%.

3. Glowtox 50 / Glowtox 50 Plus

Glowtox is basically a Buff Titanium Dioxide which can be used in dark shades. Its have the micron size below 1 due to which the finish of the product gets enhanced. This product is used in solvent base as well as water based enamels. It can replace Titanium Dioxide-Rutile 100%.

4. Rio-Bent Series

Basically all the grades are bentonite based products. This can be used in solvent based paints. It acts as rheological modifier & antisetlling property in paints & Coatings in low to high polar solvents.

5. FMSIL Series

Basically FMSIL series is fumed silica which can be used in printing inks, solvent base paints & coatings for matt finish, better transperency, better slip efect. It has outstanding suspension behaviour and it is suitable for pigmented as well as clear coatings.

6. Basofix

Basofix is a Synthetic Barium Sulphate with particle size 0.7µ which can be used in high quality paints, powder coatings for high gloss, opacity & whitness.

7. Barrigloss

Synthetic Barium Sulphate with Light Grey Colour which can be used in powder coatings, acrylic putty, primers & any solventbased coatings where Carbon black is using, It will increase gloss & biding power of coatings also it can partialy relace carbon black from the formulation.

8. ALFR

Aluminum Trihydrate is Flame Retardant which can resists the properties of paint at high temperatures. This product works on heat sinking & endothermic dehydraion. Its releases about 35 % of its weight in the form of steam @ 220° can be used in industrial paints, solvent base marine coatings, protective coatings were highly inflammable solvents are used.

9. Fastflow P / ML

Chemically Fast Flow is a Polyetheylene Wax having the melting point of 110±5. This product can be used in printing inks as well as powder coating industries for fast dispersion of hard pigments. This product can be used for Scratch & mar resistence, good leveling property.